elogind is basically systemd without being tied to a particular init. Due to the existence of seatd, elogind is no longer necessary in our opinion. We have removed systemd/elogind dependencies from many common applications from upstream Debian and repackaged them as nosystemd debs. This enables us to keep systemd/elogind out of antiX. However, installing a full-blown desktop environment on antiX is likely to bring back libelogind0.

antiX should run on most computers, ranging from 192MB old systems with pre-configured 128MB swap to the latest powerful boxes.

antiX-core and antiX-net will run with 128MB RAM plus swap, but don’t expect miracles!

192MB RAM is the recommended minimum for antiX. 256MB RAM and above is preferred especially for antiX-full.

antiX-full needs a 5GB minimum hard disk size. antiX-base needs 3.5GB and antiX-core needs 1GB. antiX-net needs 0.7GB.

Most users will be happy to use antiX-full as it offers a full desktop experience on legacy and modern computers.

If you have a very old desktop/laptop with 512MB RAM or less, or you want a desktop with "the basics", it is probably best to use antiX-base.

If you want complete control over what applications to install and know the Debian system fairly well, then use antiX-core or antiX-net since both these do not include a graphical environment (Xorg).

Choice! antiX tries to make it easy to boot on any hardware ranging from old boxes where booting with xvesa is needed to boxes with nvidia, radeon and intel drivers.

Use F6 to set the desktop and do not choose any of the Rox- or zzz- options.

Yes you can and if you decide to install during that live session, they will carry over to installation.

If you have less than 512MB RAM, and want to test antiX live, choose one of the min- options at F6. To install to hard drive, at the live boot menu, type 3, login as root and type cli-installer.

It is also a good idea to create a swap partition before installation.

If users are happy with their present bootloader, grub-legacy, grub2 or whatever else, then it is best to install grub to the root partition or don’t install it at all and then make the necessary changes after installation.

If you are installing only antiX over another OS, or dual booting with windows, then install grub to the MBR.

Yes, in fact this is the best way to install your localised antiX.

Set your options via the F2 and F3 keys and if you use a writable device, use F8 to save your choices.

Alternatively, you can do this manually by setting a variety of cheats. For example: lang=en kbd=gb,gr tz=Europe/Athens will give a US English desktop, a toggled Greek, British English keyboard and the timezone set to Athens, Greece.

The F1 help menu on live media has also been localised.

antiX suggests using the gui app found in the control centre or smxi tools. See smxi section.

The installer gives you the option to set auto-login. Post-install option > Control Centre-→Session-→Login Manager You will need to reboot for changes to take effect.

The best way is to do so at first boot when running live. F4 has these options.

Default is set to UTC.

You are also given an option during installation to set the hwclock.

If you missed the above, then there are 3 possible issues:

1) wrong timezone

2) wrong selection of UTC versus local time

3) BIOS clock set wrong

The first issue is addressed with sudo dpkg-reconfigure tzdata. Do this first. You should also be able to just check the current value with cat /etc/timezone.

Once you are sure the timezone is correct, you can work on setting your BIOS clock. Do this with the hwclock command. First do a man hwclock and then run hwclock --show to see what it is set to. It always reports in localtime which is why you need to first make sure your timezone is set correctly.

Use hwclock --localtime or hwclock --utc depending on whether you want your hardware clock to be set to localtime or utc. Most pure Linux systems use utc. Most dual boot systems use localtime.

Then, after you get your date command working via the sudo command you posted, you can use hwclock --systohc to set the hardware clock so it matches your system time. Again, you need the timezone and localtime/utc choice set correctly first (although if you want to assume they are set correctly already then this is the only command you need to run to get your changes to the date command to stick. If you assumed incorrectly then you will likely get mysteriously screwed by DST a few times per year).

Finally, if you are having problems with hwclock drift or if you are a perfectionist then you can install the ntp package which will use time servers on the net to keep your clock exactly on time. But you have to first go through the steps above before ntp will work correctly.

Either via synaptic (for antiX-full) Control Centre-→ System-→ Manage Packages-→ Settings-→ Repositories or edit individual files in /etc/apt/sources.d/ (for antiX-base and antiX-core)

antiX includes configured iptables Gufw may be more user-friendly and can be installed. Once installed, to set it up go to Control Centre-→ Network-→ Manage Firewall

Both antiX-full and antiX-base come with package-installer, which makes it easy to install popular applications. See below for more information.

antiX-full also comes with synaptic so searching for applications is easy.

To search for applications in antiX-net, antiX-core and antiX-base use our tool cli-aptiX or use apt-cache search in a terminal

For example: apt-cache search video player

antiX is set up using Debian Stable repositories by default. This allows users to keep their system up to date with regular upgrades. antiX recommends using apt update followed by apt dist-upgrade in a root terminal. Users can also keep antiX up to date via Control Centre-→ Software-→ antiX Updater Synaptic is also available for those that prefer a gui tool.

You will need to install libdvdcss2 and maybe some codecs by enabling the deb-multimedia repository (see above how to do this) and then either search for libdvdcss2 in synaptic and then install or use the command line.

The easiest way is to use the Package Installer application as it automatically does the above for you.

antiX strongly advises users not to keep the deb-multimedia repository enabled as there may be conflicts.

These window manager options come installed and ready to use in antiX-full and antiX-base:

All window managers can be run with or without the ROX or zzzFM Desktop environment that provides drag-and-drop functionality or the Conky system monitor that displays real-time information.

antiX also comes with herbstluftwm, a manual tiling window manager.

If you want to keep RAM usage as low as possible, you can choose one of the min- options. There is no wallpaper, no desktop icons, no conky and no applications running in the panel.

You can switch by clicking on the menu -→ Desktop -→ Other Desktops,

Whichever one you have running before reboot, will be the default.

In IceWM:

Right click on Desktop -→ Desktop-→ Settings-→ Conky on/off

In Fluxbox:

Right click on Desktop -→ Desktop -→ Conky on/off

In JWM:

Right click on Desktop -→ Desktop -→ Settings-→ Conky on/off

IceWM:

Click on the Desktop-→Logout there are several options including shutdown.

Fluxbox:

Right Click anywhere on the Desktop -→ Exit, which will present you with the choice to lock screen, hibernate, reboot, logout, suspend, or shut down.

JWM:

Click on the Desktop-→Logout there are several options including shutdown.

Install the downloaded or newly created iso file to a portable usb stick nd take your antiX with you in your pocket! Includes an option to encrypt the usb device for security. This tool inludes a basic gui front end, but the cli version offers more options and is easy to use.

Located in Menu-→ Applications-→System -→ Package Installer You can install packages for Disk-Recovery, Web Browsers, Graphics, Kids, Language, LaTex, Network, Non-free, Office, Server, WindowManager . . . simply choose the package you want, and the installer will do the rest. (internet connection required)

Can be found in Control Centre-→ Disks-→ Backup Your System or in Menu-→ Applications-→System -→ luckyBackup

This tool greatly simplifies the process of changing the package repositories that are used for updating/upgrading applications. The sources are set during installation depending on the selected timezone and language, and will generally work well. But there may be instances where a user might wish to change those selections.

Want to make a live iso backup of what you have installed on your hard drive? Then, this is for you! Simple, but effective.

Not only have we made it easy to set up antiX live with persistence, we also make it easy to create a remaster of the running live system!

Use the F keys to set up how you want antiX to boot in live mode and F8 to save the changes for future live boots!

*F1 - Help

*F2 - Language

*F3 - Time zone

*F4 - Various hardware options

*F5 - Persistence options

*F6 - Desktop and font size options

*F7 - Console resolution options

*F8 - Save changes (only on writable media)

NEW: Customised grub menu on live medium.

Easy. Just press F7 console (F6 on core or net) and choose the default option.

Safe Video Mode Disable KMS (kernel mode set) video drivers and force the use of the vesa video driver. Try this option of the system seems to boot but the screen is blank.

Failsafe Boot In addition to forcing safe video, also load all drivers early in the boot process. Try this option if the system does not boot at all.

Lots! Explore!

File managers and desktop:

Convert your video and audio files with:

Connect to the net with:

Editors:

Tools for remastering and creating snapshots of installed system:

General tools:

Others:

Why not try out our included cli apps:

Main changes from antiX-19

Cool in-house antiX apps available in the repos:

Since antiX is designed to work on older boxes, we have attempted to make the desktop session more robust. Also, we have tried to make it as easy as possible for new users and highlight its features. However, depending on your hardware and tastes, you may wish/need to make some changes. For example, increasing/decreasing the desktop startup delay. The configuration files are found in Control Centre-→Session-→User Desktop Session

Ok, I want to use IceWM without desktop icons, choose a colour background, and only have the volume icon on the taskbar. My box is new, so I want to reduce the startup delay and keep conky on the desktop.

1.Boot using IceWM option or change to it via Menu-→Desktop-→Other Desktops

2.Control Centre-→Session-→User Desktop Session click on startup tab and comment # entries you do not want to use

3.Control Centre-→Session-→User Desktop Session click on desktop-session.conf and make the following changes Startup delay "0" Notification dialog "false"

4.Use the Wallpaper application in Control Centre-→Desktop to set No wallpaper and a background colour.

5.Logout and log back in to your customised desktop. They will be saved on reboot.

A customised 4.9 version and 5.10 on antiX-full (64 bit)

There are several other kernels available via the package-installer application. Such as:

If you still need to use flash, use the package-installer to do so.